When the surface of your tile is in good condition, it’ll last for a very long time without problems. But even though tile grouting is a simple process, you can still make mistakes while doing it.
If you’re considering having a grouting project, Shower Solutions lists a few things you’ll need to do to avoid common tile grout problems.
Take Your Time
Many grouting problems occur from rushing through the process. Take your time and make sure to distribute the grout evenly using the proper motion. Begin by swiping it across the tiles in a 45-degree angle and finish up with a back and forth motion.
Mix the Grout Properly
If you want your grouting project to turn out perfectly, mix the grout to the right consistency. Read the instructions on the bag and follow them accordingly. If you don’t, you’ll end up putting too much water in the grout. Excessive water will not allow the grout to set up properly.
Allow the Grout to Dry
Dry the grout before you let anyone step on it. When you walk on it before it dries, you’ll only make it uneven. Give it an ample time to dry at least overnight before you start stepping on it.
Avoid Peaks and Valleys
Peaks and valleys are common grout problems. This means that one area in the grout is very thin, while the other spot is very high. To avoid this, get a lot of grout in the joints and wipe it down using a wet sponge. This process not only helps clean the excess grout, but it also helps avoid those peaks.
Seal the Grout
Once you’re done, don’t forget to seal the grout. Sealing it prevents dirt from getting in the joints and keeps it from staining.
follow these simple pointers for a successful grouting project. If you want your tile to have a great look that will last, just look for a regrouting company in your area today.