If you think you have a shower leak, the first thing to do is to conduct a visual inspection. Determine if the affected portion and water damage is periodic or chronic. Most shower leaks are periodic, which means you’ll only notice symptoms when using the shower or after using it. On the other hand, a chronic shower leak worsens over time, and the issue is usually found in the pressurised pipes. Shower leak repair expert from giddyuptileandgrout.com.au says proper inspection should be done to the following:
The shower should be running when you inspect the door seals. Check if there are damaged or misshapen rubber seals and adjust the position of the shower door when required. If you see cracks on the silicon seal, you might have a shower leak.
Check if there are holes in the joints of the tile grout since water can easily access these and cause moisture issues behind the wall or a shower leak. If holes are present, you may need to have your tiles regrouted.
When you notice regular cracking of the seals, make sure the shower tray is properly supported and in place. Plastic types are usually springy, so check underneath to see if they’re in place.
Incompetent installers don’t seal underneath the door frame’s base prior to installing the screen. With these, the water will have access to the frame of your shower enclosure, access the pillar bases and cause leaks. Most shower enclosures are required to be sealed outside the screen directly at the edge of the wall and not on the inside of the enclosure. When sealed inside, disassembly of the screen and enclosure and proper sealing resealing procedures are required.
While you can easily conduct these simple inspection tasks, if you find any leaks or other issues, you must seek aid from professionals offering shower leak repair services. Undertaking these types of repair yourself is not recommended. You can do more harm than good, especially if the source of the leak stems from faulty plumbing.